CUT-SECTION MODEL OF DEMONSTRATION CHASSIS WORKING WITH ELECTIRCALS VEHICLE: (MT-A00)
The model is made out of full size original used car/van/LCV/Truck/tractor chassis. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
Maximum parts and accessories of an engine like of the cylinders, cylinder head, Inlet and Exhaust manifolds, Fuel system, Lubrication system, cooling system, self-starter, Alternator, etc, are sectioned to show the internal constructional details. This complete sectioned models is coupled with 220/230V A.C single phase Motor through a Reduction drive unit. By running the motor the complete working details of the individual parts, different mechanisms can be demonstrated as the model is running at a very low speed (about 15 to 20 rpm).
It consists of a Clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The Hydraulic/Mechanical circuit from the pedal to the Clutch is active and will help to demonstrate the response of clutch systems. The gearbox is coupled to Differential gear box with an axle and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting.
The components related to fuel system will be suitably sectioned and made working to explain the internal details of the system.
It consists of Exhaust Manifold and silencer in cut section to explain internal construction.
It consists of the engine Lubrication system along with the Lubrication oil pump.
This will explain both the front and rear Suspension systems along with necessary linkages etc., The construction and internal details can be explained using the same.
This Mechanical/Hydraulic/Air circuit of the Braking mechanism is suitably sectioned to show the internal constructional details. The principle of Pedal braking and hand braking can be explained. (Only Hydraulic Braking circuit will be made working.)
This can be seen and included in the Steering wheel, Steering gear and coupling at the wheels.
The Electrical system gives a complete idea of the electrical system and circuit of a vehicle. It has been provided with Sectionised battery and terminals are provided to connect another
working battery to show the working of the individual parts and accessories such as a Sectionised Self starter, Alternator, Wiper Motor, Distributor, Horn relay, etc., and working
of head light Brake light, side indicator, Horn, parking lights, spark in spark plugs, etc. Note: The complete wiring related to MPFI system will be retained but the working of MPFI
system associated with the electrical system cannot be made working.
|MT-A01||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS MPFI VEHICLE|
|MT-A02||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS CARBURATOR VEHICLE|
|MT-A03||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS DIESEL 2 WHEEL DRIVE|
|MT-A04||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS DIESEL 4 WHEEL DRIVE|
|MT-A05||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS DIESEL LCV|
|MT-A06||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS TRUCK|
|MT-A07||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS TRACTOR|
|MT-A08||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS THREE WHEELER PETROL|
|MT-A09||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS THREE WHEELER DIESEL|
|MT-A10||CUT-SECTION MODEL OF DEMONSTRATION CHASSIS TWO WHEELER PETROL|