CUT SECTION MODEL OF POWER TRAIN SYSTEM EQUIPMENT (MT-B11)
The model is made out of full size original, engine, Gear box, clutch etc The Maximum parts and accessories of the engine like four cylinders of the cylinder block, Cylinder heads, valve ports, piston, Connecting rod, inlet and Exhaust manifolds, throttle body, Fuel system, Lubrication system, Water pump, radiator, oil pump, Oil pan, air Filter, self-starter, Alternator Clutch, Gear box etc are sectioned to clearly demonstrate the internal constructional details. The reduction gear unit will be coupled to the flywheel of the engine assembly, which is then coupled to the single phase AC motor. So that by running the electric motor the entire function of the engine can be demonstrated .
The engine is coupled with Gear Box. The gearbox is coupled to the engine through the diaphragm clutch and gear selection is done by shifting the gear shift control lever. The bell housing will be sectioned to show the clutch connected to the flywheel and the clutch housing will be sectioned to show the diagram spring pressure plate, the clutch will be made operational through its original mechanical system fabricated on to the stand to which the whole system is mounted, so that by operating clutch pedal the engagement and disengagement of the clutch can be demonstrated. The gearbox will be suitable sectioned to demonstrate the gear mechanism, shifter mechanism etc, and shifting the gear lever the complete operating of the gear box can be demonstrated. And will be coupled to the engine assembly. Through the Clutch so that by working the engine the entire system of engine to clutch and gear box can be demonstrated working.
The whole system is mounted on to a sturdy iron frame, and the frame will be provided with caster wheels for easy movement of the entire model. Suitable color imported painting will be carried out along with Miracle coating for the model will be done for extra gloss and shine. The painting will be carried out in such a way that different colors will be use for different components such as Air, oil, petrol, exhaust identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears will be suitably electroplated. A switch box with indicator switch will be provided.